Sudo no password required echo "debian ALL=NOPASSWD: ALL" >/etc/sudoers Sed -i -e 's:PermitRootLogin without-password:PermitRootLogin yes:g' /etc/ssh/sshd_config Sed -i -e 's:UsePAM yes:UsePAM no:g' /etc/ssh/sshd_config Ssh sed -i -e 's:PermitEmptyPasswords no:PermitEmptyPasswords yes:g' /etc/ssh/sshd_config Sed -i -e 's:'$root_password'::g' /etc/shadow Remove root password root_password=$(cat /etc/shadow | grep root | awk -F ':' '') I take full responsibility for knowing my beagle is now insecureĪs of, BeagleBoard images now longer enable these insecure options by default, you are free to recreate them as you wish. Sudo apt-get install build-essential git-core device-tree-compiler Install build requirements: (add's 145Mb to the console image) Sudo apt-get install npm c9-core-installer -reinstallĪdding bb.org-overlays to jessie console imageĬurrently by default, the console image doesn't include the *.dtbo overlays. Sudo sh -c "echo '#deb-src wheezy main' > /etc/apt/sources.list" Sudo sh -c "echo 'deb wheezy main' > /etc/apt/sources.list" Sudo dpkg -i rcn-ee-archive-keyring_*_all.deb GPG error: Disable: repo: sudo nano /etc/apt/sources.list Note this directions are version dependent, so double check your cat /etc/dogtag W: GPG error: wheezy-bbb W: GPG error: wheezy-bbb Release: Sudo timedatectl set-timezone America/North_Dakota/Center If you would like to change this to your local region.ĭpkg-reconfigure -f noninteractive tzdata Sudo sh -c "echo 'something' > /etc/privilegedfile"īy default this image is set up to display time in utc mode. Loader: failed to load slot-7 BB-SPI1-01:00A0 (prio 0)Īdd "CAPE=BB-SPI1-01" to /etc/default/capemgrĪs a normal user, you can not "sudo echo 'something' > /etc/privilegedfile" Slot #7: Requesting firmware 'BB-SPI1-01-00A0.dtbo' for board-name 'Override Board Name', version '00A0'įailed to load firmware 'BB-SPI1-01-00A0.dtbo' Slot #7: Requesting part number/version based 'BB-SPI1-01-00A0.dtbo Slot #7: dtbo 'BB-SPIDEV1-00A0.dtbo' loaded converting to live tree ![]() Slot #7: Requesting firmware 'BB-SPIDEV1-00A0.dtbo' for board-name 'Override Board Name', version '00A0' Slot #7: Requesting part number/version based 'BB-SPIDEV1-00A0.dtbo Instead an init script has been set up to load the cape/capes as soon as possible. It is currently not possible to load "custom" capes via: capemgr.enable_partno=xyz. WARNING, this is now deprecated, please use U-Boot overlaysĭue to limitations in debian wheezy's userspace, the use of an initramfs, and having firmware builtin to the kernel. Sudo apt-get install linux-headers-$(shell uname -r) Sudo apt-get install linux-headers-`uname -r` If you want to build a kernel module natively, you'll need to install the correct kernel headers. We can't ship support for everything on release day, so we push out new kernels as fixes, support for new capes, etc are posted on the mainline list. (make sure to remove the microSD after flashing is complete, otherwise it'll just keep on re-flashing the eMMC) #cmdline=init=/opt/scripts/tools/eMMC/init-eMMC-flasher-v3.shĬmdline=init=/opt/scripts/tools/eMMC/init-eMMC-flasher-v3.shĪnd reboot the system, it'll flash the eMMC on the next bootup. Login as debian (password = temppwd) and edit /boot/uEnv.txt with nano (sudo nano /boot/uEnv.txt) or your preferred editor. To set up the standalone microSD image to automatically flash the eMMC on powerup. On the next reboot, should show the full microSD card size. ti_cgt_pru_2.1.1_armlinuxa8hf_busybox_installer.shĪny images after will have support for the PocketBeagle Expanding File System Partition On A microSDīy default the microSD image is only about 2GB in size, to fully expand the partition to the full size of your microSD card simple run. Older rootfs (when above package doesn't exist):Ĭhmod +x ti_cgt_pru_2.1.1_armlinuxa8hf_busybox_installer.sh Sudo apt-get install ti-pru-cgt-installer This file can also be accessed via a PC (Windows/Mac/Linux) via either mounting the FAT partition directly off the microSD card or via the usb interface (flash drive). You should check the version of the image on the microSD/eMMC by opening the ID.txt file in the FAT cat /etc/dogtag 3.11.7 U-Boot Overlays, which got loaded.3.11.2 U-Boot /boot/uEnv.txt configuration.3.10.2 ssh 3.10.3 sudo no password required.3.10 i take full responsibility for knowing my beagle is now insecure. ![]() 3.9 Adding bb.org-overlays to jessie console image. ![]() 3.2 Expanding File System Partition On A microSD.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |